|
Fundamentals
- Purchasing
- California Raisins,
a very traditional ingredient, are perfect for a variety of today’s
baked goods. Made from naturally sun-dried seedless grapes,
they have approximately 1,750 to 2,650 berries per kg in select size
(1,000 to 1,200 berries per pound).
- The Right Raisin
for the product – California Seedless Raisins are
available in a variety of sizes appropriate for bakers. These include
mini midget raisins, midget raisins, select raisins, and jumbo raisins.
Different packers have different terms to describe size but, for the
most part, California Raisins are sized either by count per lb or kilo
or by screen size. Specify screen size if a special size is important
and integration throughout the product is required. Golden raisins, Zante currants and other dried grape varieties are also available for specialized applications. Contact a California
Raisin Packer for more information.
- List of Raisin Processors and Packers
- California Raisins
are shipped in poly-lined boxes. They are available in bulk packages
of 13.6 kg (30 lbs) and other size cartons. This is ideal for purchase
by a full container load of approximately 17 metric tons per 20-foot
container, where 1,250 to 1,800 cases may be loaded depending on the
carton size. California Raisins are available in a variety of snack
and consumer packs, too. Most bakers purchase California Raisins in
25- or 30-lbs cases.
- Conditioning
- Raisins can be used
right out of the case, but experienced bakers commonly condition raisins
in advance. This involves re-hydrating raisins to about 28 percent moisture.
California Raisins may also be purchased pre-conditioned.
- Conditioning is
an important step in the production of raisin breads. If raisins are
not conditioned but added directly to the dough, they will draw moisture
from the bread during fermentation and baking. This also causes the
bread to stale during shipping and distribution, which reduces the shelf
life.
- Ways to Condition
Raisins
For small quantities,
the American Society of Bakery Engineers recommends that quantities
of not more than 30 lbs be conditioned by adding 12 to 15 percent of
warm water by weight to the raisins right in the case. Temperature of
the water should not exceed 75° to 80°F and 3.6 to 4.5 lbs of water
to 30 lbs of raisins. Re-close the poly-liner, cover the container,
and turn it a number of times to distribute the water uniformly. Turn
again after about 2 hours and allow to stand for an additional 2 hours
for a total conditioning time of at least 4 hours or overnight. Longer
periods may over condition and release more solids from the raisins.
Any remaining liquid should be added to the dough as part of the liquid
component in the formula. Do not condition raisins in excessively hot
water. For best results, raisins should be about 75°F at the end of
the process.
For larger quantities,
the American Institute of Baking recommends that raisins be placed in
a trough or tank with a screened bottom opening for draining the water.
Completely cover the raisins with water at 75° to 80°F and then, drain.
Close the drain to retain leached solids and cover the trough or tank
and allow the raisins to absorb the surface water for at least 4 hours
or overnight. Longer periods may over condition and release more solids
from the raisins. Any remaining liquid should be added to the dough
as part of the liquid component in the formula. Do not condition raisins
in excessively hot water. For best results, raisins should be about
75°F at the end of the process.
|
 |
|
|